Renewable Revolution

Open Forum => General Discussion => Topic started by: AGelbert on May 26, 2017, 02:23:48 pm


Title: Computer Software Security
Post by: AGelbert on May 26, 2017, 02:23:48 pm
Agelbert NOTE: What People should know about the Replace Exclusive OR Instruction (RXOR) and Hackers.

(http://renewablerevolution.createaforum.com/gallery/renewablerevolution/3-180517182744.png)

The page contains images that come from the domain "somecards.com" which is presumably on Symantec's blacklist for hosting malicious .jpg images.
This blanket approach is too broad, giving false positives, but you can never be too careful, especially if you are using a Windows OS.


In regard to ensuring careful attention to potential attacks, for once, we agree. 

I programmed a mainframe air traffic control computer for several years. I was one of the few who could program in machine code. That means I am an expert at using Boolean algebra (denoting a system of algebraic notation used to represent logical propositions, especially in computing and electronics.) to talk directly with a computer. What does that have to do with this discussion?

I know, for example, that the RXOR instruction (that ALL COMPUTERS USE ROUTINELY)  is a toggle switch to completely reroute a program path a certain way, and then when the same key sequence is made, reroute it back. THAT is one of the FEW ways that hackers use to do their thing. Yes, I'm sure you know that. But I am bringing it to the fore here  so readers can understand that hacking is not some big mysterious thing for math "wizards"; it is a way for devious individuals of average, not superior, intelligence to try to STEAL from honest people. 

ALL computers MUST run in machine language, regardless of what "high order" language they use to interface human speak commands about math and labels to the machine language of binary bit coding. The only nuances in machine language (bit pattern the hardware understands) come from the size of a "word" (this determines where to set the far left bit when a "word" is a negative number) and whether you use octal or hexadecimal numbering. But in the end, it's all  LA(load accumulator) followed by other instructions like shift left so many bits or shift right so many bits, OR, XOR, RXOR, AND, NOT, SA (store in the accumulator), jump to label contents (address) if flag is set or don't jump if the flag is not set. etc.

The point is that hackers can ONLY get into your stuff by pushing some code into a program branch that is routinely used. THAT'S IT. They make a big deal about "viruses" and "malware" and "ransomeware" and "phishing" (and so "I am the greatest and can steal you blind so be afraid" on braggadocio), but it's all MAINLY about the RXOR.

The RXOR can, by jumping to a subroutine that zeroes out multiple memory locations, effectively wipe out giant swaths of code, if that's what you want to do, AND LEAVE NO TRACE that it was done. But they do that only when they want to crash your system without leaving evidence you can analyze in a post crash dump (trigger a Store zeroes instruction to the area the they reprogrammed).

The BASTARDS that do hacking these days do not really want to crash your system; they want to WATCH what you do in order to steal you blind. So, they insert a RXOR to, in nanoseconds, store some of your activity and rapidly return to your normal routine.

What they call "worms" and "viruses" are simply a step by step process to to get into what is called "protected" memory (read only) and WRITE something into it. That "something" is usually a RXOR (replace exclusive or) instruction that sends your program to a quiet key logger and back. They can be real "sophisticated" and put timers for DOING STUFF at certain dates or when certain activity is detected. It is all quite entertaining to unethical bastards that enjoy this sort of thing. (http://www.createaforum.com/gallery/renewablerevolution/3-311013201314.png)

So, yeah, you can be assured that I will ALWAYS be VERY careful.  8)
Title: Posting content format and Fair Use copyright Law
Post by: GWarnock on November 07, 2017, 02:52:01 pm
Instead of just a link, how do you show the article in full?
Title: Re: Posting content format and Fair Use copyright Law
Post by: AGelbert on November 07, 2017, 03:06:14 pm
Instead of just a link, how do you show the article in full?

I have to do exercise for an hour now, but I will retun and show you how to do that.

At first, I had the same problem.(http://www.desismileys.com/smileys/desismileys_6656.gif) Once you see how this works, you will have no problems.

But while you wait, just go to any of my posts with imagers and hit the "Modify" button. Then look at how I formated the image. I'll explain more in a little while.      (http://www.createaforum.com/gallery/renewablerevolution/3-200714191456.bmp)
Title: Re: Posting content format and Fair Use copyright Law
Post by: GWarnock on November 07, 2017, 04:16:06 pm
take your time..  :)
Title: Re: Posting content format and Fair Use copyright Law
Post by: AGelbert on November 07, 2017, 06:14:26 pm
Okay, I'm back.  I see that you aren't here right now so I'll just start the discussion for you you to pick up on when you get back.

As you know, some small smiley images are available just by pressing a button on the menu just above the text area for a post or a reply to a post (there are also lots of other cool tools in the posting menu but I am just discussing images today).

These are the ones you never size which are easy and quick to add  to posts anywhere in the text:

 :) ;) :D ;D >:( :( :o 8) ??? ::) :P :-[ :-X :-\ :-* :'(

Now, when you want to post an image like a jpg or a gif or a png (etc.) that you have uploaded to the gallery OR you have the full address of from somewhere else, the situation is different.

For example, below is the address to one of my kitty images:

http://renewablerevolution.createaforum.com/gallery/renewablerevolution/3-250817124114.png

As you can see by the path of the address, it is an http (hypertext marking internet protocol address) image in the renewable revolution forum. It is located in the gallery and has an image number of 250817124114. It was uploaded as a png (Portable Network Graphics) type of image.

However, you do not see the image here.

In order to see the image, you need to format it properly. I will now show you the simple format to use, with a space between each character, so it will be be displayed here (when you use this format, do not put any spaces between the characters or it will not work).

[ i m g ] http://renewablerevolution.createaforum.com/gallery/renewablerevolution/3-250817124114.png [ / i m g ]

NOW, I will repeat the above without the spaces:

(http://renewablerevolution.createaforum.com/gallery/renewablerevolution/3-250817124114.png)

Is all that clear as mud?  :D

Now let us go to one of your recent posts and modify the image properly. But before we do that, there is a trick I took a while to learn in the gallery that I will pass on to you.

You see, the gallery does NOT give the right image address right after you upload an image to it. (http://www.coh2.org/images/Smileys/huhsign.gif)

Yeah, it gives a link, but not the one you want.  ;)

To show you what I mean, I will go to the gallery and grab an image by copying the link address (see below).

http://renewablerevolution.createaforum.com/index.php?action=gallery;sa=view;id=1295

That's basically useless. Yes, you can "attach" the image to post, as you have done, but it doesn't look as good.

So here is what you do:

1. Right Click on the image and select "open link in new tab".
The address in the new tab is not what you are looking for:
http://renewablerevolution.createaforum.com/index.php?action=gallery;sa=view;id=1295

2. Go to the new tab and Right Click on the image and select "open  link in new tab".

3. The second tab has the address you are looking for.

http://renewablerevolution.createaforum.com/gallery/renewablerevolution/3-071117175342.jpeg

NOW you can post that image by putting (without the spaces):
 [ i m g ] http://renewablerevolution.createaforum.com/gallery/renewablerevolution/3-071117175342.jpeg [ / i m g ]

Here is the image:
(http://renewablerevolution.createaforum.com/gallery/renewablerevolution/3-071117175342.jpeg)

It's too big so I have to size it down somewhat. I do that by putting a space after the "g" in "img" on the left side and assigning it a width in pixels. In this case, I assign it a "width=640".

(http://renewablerevolution.createaforum.com/gallery/renewablerevolution/3-071117175342.jpeg)

I can make it as small as I want. Here is the image with a width=50.

(http://renewablerevolution.createaforum.com/gallery/renewablerevolution/3-071117175342.jpeg)

You can now save the image address in a document for posting here or on the internet. If you post the address in Disqus, you do not have to format it but you cannot control the size. A brief description of the image in your document (e.g. Crime does not pay  calculator) will help you be able to find it quickly when your collection starts building up.

What you did with the Trump baby image, using the "attach" feature, has this address in the link:

http://renewablerevolution.createaforum.com/index.php?action=dlattach;topic=134.0;attach=40;image

I looked up that picture and found the address on the internet (see below):

http://2.bp.blogspot.com/-9XFIvswc62s/Vqg2umdA5YI/AAAAAAAAAno/yUTmXzcpJRk/s1600/CJgxC5wUAAED55j%2B%25281%2529.jpg

I will now format the above with [ i m g ] http://2.bp.blogspot.com/-9XFIvswc62s/Vqg2umdA5YI/AAAAAAAAAno/yUTmXzcpJRk/s1600/CJgxC5wUAAED55j%2B%25281%2529.jpg [ / i m g ]

(http://2.bp.blogspot.com/-9XFIvswc62s/Vqg2umdA5YI/AAAAAAAAAno/yUTmXzcpJRk/s1600/CJgxC5wUAAED55j%2B%25281%2529.jpg)

Now I'm going to size it down to img width=200.


(http://2.bp.blogspot.com/-9XFIvswc62s/Vqg2umdA5YI/AAAAAAAAAno/yUTmXzcpJRk/s1600/CJgxC5wUAAED55j%2B%25281%2529.jpg)

Now I am going to center the downsized picture:


(http://2.bp.blogspot.com/-9XFIvswc62s/Vqg2umdA5YI/AAAAAAAAAno/yUTmXzcpJRk/s1600/CJgxC5wUAAED55j%2B%25281%2529.jpg)

I size the images I want to use to cover the whole screen at img width=800. However I have several images at img width=640. The smileys are usually either without sizing or img width between 80 and 20, depending on how much impact I want them to have.

Returning to the galllery in this forum, always remember when you want to grab one of those images to do the "right click, open in new tab" twice" to get the address on the second tab of the image for posting and resizing.

I am ready for questions.  (http://www.pic4ever.com/images/34y5mvr.gif)
Title: Re: Posting content format and Fair Use copyright Law
Post by: GWarnock on November 07, 2017, 06:53:00 pm
Still here?
Title: Re: Posting content format and Fair Use copyright Law
Post by: AGelbert on November 07, 2017, 07:00:48 pm
I'm here. I was just getting some good news to post.  ;D
Title: Re: Posting content format and Fair Use copyright Law
Post by: GWarnock on November 07, 2017, 07:21:08 pm
I'm going to have to study that for awhile, like you said, I can do the modify button to see what you did.  ;)
Is that what you use with your  emoji gallery too?
Also, how do you do the entire story?

This is deep and I'm Not.. LOL
Title: Re: Posting content format and Fair Use copyright Law
Post by: AGelbert on November 07, 2017, 07:42:14 pm
I'm going to have to study that for awhile, like you said, I can do the modify button to see what you did.  ;)
Is that what you use with your  emoji gallery too?
Also, how do you do the entire story?


This is deep and I'm Not.. LOL

Don't panic. Rome was not built in a day.

"Is that what you use with your  emoji gallery too?" Yes.

"Also, how do you do the entire story?" Hmmm. Everything is in sections.

Take this bit of text, for example:

ABXDEFGHIJKLMNOP12345

By default, the software places on the left (left justified) and with a standard text size of "10".

I can make it bigger and change the color of any part by using the "Font size" and "Change Color" feature in the menu above:

ABXDEFGHIJKLMNOP12345

I can do that selectively for any character, or group of characters:

ABXDEFGHIJKLMNOP12345


I can center the whole thing:
ABXDEFGHIJKLMNOP12345

I can make some of it bold and some italics or both:

ABXDEFGHIJKLMNOP12345

I can put the whole thing in quotes (quote button above):

Quote
ABXDEFGHIJKLMNOP12345



Title: Re: Posting content format and Fair Use copyright Law
Post by: GWarnock on November 07, 2017, 07:55:32 pm
So high light, copy and paste, don't eat the paste.. oh, never mind that last part..   ;)
then past here and adjust as necessary?
Title: Re: Posting content format and Fair Use copyright Law
Post by: AGelbert on November 07, 2017, 08:09:27 pm
So high light, copy and paste, don't eat the paste.. oh, never mind that last part..   ;)
then past here and adjust as necessary?


Exactly.

I just highlighted and copied a post published by Oil Change International at EcoWatch.

I will now paste it below and then copy and paste the headline and author and date. THEN I resize and center the headline to font size 18 and BOLD. If I want an image above, I would center it at a width of 640, usually. I place a link to the article at the end. Most of the time I do not post the whole article. I normally post a snippet to get people to read the full article at the place it was published first.
(https://uploads.disquscdn.com/images/9adc777a0e08428257b76ece69d18ee52006bb5e39d60d966bb2440d29d17641.jpg)

Paradise Papers Reveal Toxic Mix of Tax Havens, Oil and Trump’s Top Aides

Oil Change International Nov. 06, 2017 11:19AM EST

By Andy Rowell

On Sunday, the International Consortium of Investigative Journalists (ICIJ), working with dozens of media partners around the world, published the results of a huge global investigation into the use of tax havens.

The results of the investigation, based on the leak of 13.4 million files from two offshore service providers and 19 tax havens' company registries, are shocking and lead to people who are close to Trump.

The files, known collectively as the Paradise Papers, reveal the offshore financial affairs of some of the world's biggest multinational companies and richest individuals, including some in Donald Trump's cabinet.

Trump has said he will work for ordinary Americans, but his Cabinet are certainly not paying their fair share of tax.

Let's take a quick look at Secretary of State Rex Tillerson. The ex-boss of Exxon is named in the Paradise Files "as a director of an offshore firm used in a multibillion-dollar oil and gas venture in the Middle East that became embroiled in controversy," according to the Guardian, one of the papers involved in the Paradise Papers collaboration.

Tillerson was a director of Marib Upstream Services Company, incorporated in Bermuda in 1997 to conduct operations in the Yemen's Marib-Al-Jauf basin, according to documents from leading offshore law firm Appleby, which is at the center of the leak.

Marib was tied to Exxon during the time that Tillerson was president of ExxonMobil's Yemen division. Tillerson sat on Marib's board in the late nineties.

In turn, according to the ICIJ, Marib Upstream was a joint Venture between three companies, including the Yemen Exploration and Production Company which was jointly owned by Exxon and Hunt Oil.

Hunt had discovered the gas fields in the mid nineteen eighties and had brought in Exxon to help develop them.

However, according to the ICIJ, "In 2005, the Yemeni government … turned over production rights to a state-owned company," effectively nationalizing the assets. Naturally Exxon and Hunt objected and filed a complaint with the International Chamber of Commerce, although Yemen won. Despite this ruling, the company still existed as recently as 2015. But this is not Exxon's only offshore dealings.

The Guardian pointed out that in a report published last year, the campaign group Citizens for Tax Justice said Exxon had at least 35 subsidiaries in tax havens such as the Bahamas, Bermuda, Cayman Islands and Luxembourg. The company held over $51 billion in offshore accounts while Tillerson was CEO.

The leak also raises questions about U.S. Commerce Secretary Wilbur L. Ross, Jr. who still has a stake in a shipping firm, Navigator holdings, that receives millions of dollars a year in revenue from a company whose key owners include Russian President Vladimir Putin's son-in-law, which is incorporated in the Marshall Islands in the South Pacific. Some of the individuals linked to the company are closely related to top Russian officials currently under sanctions.

It is alleged that Ross was not totally forthcoming about the extent of these business dealings. According to NBC News, Ross "failed to clearly disclose those interests when he was being confirmed for his cabinet position."

And once again the scandal links to oil. According to the ICIJ, "Among Navigator's largest customers, contributing more than $68 million in revenue since 2014, is the Moscow-based gas and petrochemicals company Sibur," which was created by the Russian state.

Two of its key owners are Kirill Shamalov, who is married to Putin's youngest daughter, and Gennady Timchenko, the sanctioned oligarch whose activities in the energy sector, the Treasury Department said, were "directly linked to Putin."

The ICIJ continued: "The leaked files showed a chain of companies and partnerships in the Cayman Islands through which Ross has retained his financial stake in Navigator. The fact that Ross' Cayman Islands companies benefit from a firm controlled by Putin proxies raises serious potential conflicts of interest, experts say."

Amos Hochstein, the top energy diplomat during the Obama administration, told the ICIJ: "When you start doing business with Russian energy companies like Gazprom and Sibur, you're not just getting into bed with the company. You're getting into bed with the Russian state."

The Democrats have seized on leaked documents, with Sen. Richard Blumenthal (D-CT) calling the revelations of the Kremlin links "inexcusable." Blumenthal also told NBC News, "Our committee was misled, the American people were misled by the concealment of those companies."

But today Ross (http://renewablerevolution.createaforum.com/gallery/renewablerevolution/3-250817135149.gif) has come out fighting. He told the BBC, "There's nothing whatsoever improper about Navigator having a relationship with Sibur … If our government decided to sanction them, that would be a different story." (http://renewablerevolution.createaforum.com/gallery/renewablerevolution/3-250817121829.png)
https://www.ecowatch.com/paradise-papers-trump-2507109886.html
Title: Re: Posting content format and Fair Use copyright Law
Post by: GWarnock on November 07, 2017, 08:18:12 pm
And it is legal to do this from anywhere?
Title: Re: Posting content format and Fair Use copyright Law
Post by: AGelbert on November 07, 2017, 08:20:41 pm
AS you can see, I made some added adjustments to the story.  ;D The BS detector is sized at img width=150. The Ross CROOK is so full of bold faced BS that I felt it was approrpiate to point that out. (http://www.desismileys.com/smileys/desismileys_6869.gif)
Title: Re: Posting content format and Fair Use copyright Law
Post by: GWarnock on November 07, 2017, 08:28:58 pm
Can you copy and paste youtube vids to play ?
Title: Re: Posting content format and Fair Use copyright Law
Post by: AGelbert on November 07, 2017, 08:29:47 pm
And it is legal to do this from anywhere?

Technically it is legal under the copyright laws. When a web site makes a lot of noise about "this is copyrighted so do not copy any part of this anywhere else or we will come after you", I make real sure to not upset them by just putting the headline and a tiny snippet.

All the posts here fall under the Copyright Fair Use provision of copyright law.

For a full discussion, go the website below:

Copyright FAQs
Copyright Basics FAQ
Copyright Protection: What it Is, How it Works
Copyright Ownership: Who Owns What?
Copyright Registration and Enforcement
Grading Teachers on Copyright Law - Videotaping for the Classroom
Copyrighting Your Software -- Why Bother?
Copyright Law Changes That May Affect You

https://fairuse.stanford.edu/overview/faqs/

The bottom LEGAL line is that I am posting them to encourage the dissemination of knowledge, not making money off of these posts and am not claiming to be the writer of these articles. That's what fair use is all about.
Title: Re: Posting content format and Fair Use copyright Law
Post by: AGelbert on November 07, 2017, 08:38:00 pm
Can you copy and paste youtube vids to play ?

Certainly.

Here's a U-tube video from yesterday's Thom Hartmann program I just right clicked on it, copied it and pasted it here. I always center the video because it looks better. I copied his headline, placed it in bold, gave it BLUE color, Font size 18 AND, of course, centered it:

Are Hydroponics Watering Down Organic Food Standards? (w/Guest Lisa Stokke)

https://youtu.be/rKLr-YBICUk

What would happen if the organic labels no longer specified organic foods grown in the soil but also hydroponics? Lisa Stokke from Next 7 Joins the Thom Hartmann program to discuss saving our food.

Thom Hartmann Nov. 6, 2017 3:30 pm
Title: Re: Posting content format and Fair Use copyright Law
Post by: AGelbert on November 07, 2017, 08:49:29 pm
Here is a pararaph from a recent lengthy article I wrote which I published here and at the Daily KOS, which is quite picky about not violating copyright laws:

Quote
We now must apologize for interrupting this article to bore you readers with some fine print:

Agelbert NOTE: The following includes snippets of an excerpt from the excellent scientifically accurate book, "The Wave. Copyright ©2010 Susan Casey. Published by Doubleday Canada, an imprint of the Doubleday Canada Publishing Group, which is a division of Random House of Canada Limited".

I am posting said snippets of said book review under Fair Use for the purpose of Commentary. I am not posting for commercial purposes. Even though Susan Casey and her publisher may benefit from my praise of her book, which provides ample evidence for increased giant wave activity, I do not benefit monetarily.

Consequently, I am sure these snippets of the book review excerpts posted below are done under Fair Use - for a limited and "transformative" purpose (i.e. Commentary) through which the public will reap benefits (it may even save thousands of lives). Nevertheless, if the Daily Kos legal eagles are concerned that I may be infringing on a copyright here, I will delete the entire article.That ends the fine print.
Climate Change, Blue Water Cargo Shipping and Predicted Ocean Wave Activity: Part 3 of 3 parts (http://renewablerevolution.createaforum.com/climate-change/future-earth/msg7422/#msg7422)
Title: Re: Posting content format and Fair Use copyright Law
Post by: GWarnock on November 07, 2017, 09:36:07 pm
Goodnight AGelbert, THANK YOU..   ;D
Title: Re: Posting content format and Fair Use copyright Law
Post by: AGelbert on November 07, 2017, 10:27:52 pm
Goodnight AGelbert, THANK YOU..   ;D

You are  (http://www.createaforum.com/gallery/renewablerevolution/3-301014181908.gif)
Title: Removed "forum" tab
Post by: GWarnock on November 08, 2017, 07:47:39 pm
Hey AG, did you remove the forum tab? ???
Title: Re: Removed "forum" tab
Post by: AGelbert on November 08, 2017, 10:16:37 pm
Hey AG, did you remove the forum tab? ???

Yep. I just wrote a long post and it got wiped accidentally. I will write it again. The short answer is I found out, after all these years  :-[, how to disable the blog front page (which I have never used) so the "home" button now takes you to the forum (which is the only place I post at).

Title: Re: Removed "forum" tab
Post by: AGelbert on November 08, 2017, 10:44:33 pm
The "Forum" button was removed by the create-a-forum software now that "Home" is here. That is what I have always wanted, but had never figured out how to do.  :P So how can I have a forum for so many years and not know all the ins and outs of it? I will explain.

This forum, which is free  ;D, was set up for me by RE, the Admin at the Doomstead Diner blog and forum. I started out there is 2012 and my "Agelbert Newz channel" (a posting area there I put all my posts) garnered a lot of views (It now has over a million views  :o).

RE liked that, but did not like my decidedly negative views on fossil fuels and peak oil, so we went round and round (http://www.pic4ever.com/images/2mo5pow.gif) (http://www.pic4ever.com/images/swear1.gif).

Also, the Doomstead Diner is cursed with some money loving racists, egomaniacs and defenders of the fossil fuel CRAP civilization we have, PLUS a lot of idiocy about the "benefits" of Capitalism and/or "Libertarian" BALONEY. Needless to say, I got into a lot of "friendly" discussions about God, ethics, the wrongness of being greedy, etc.   (http://www.pic4ever.com/images/3ztzsjm.gif)

This always grew tiresome so I would go away for a while.

Now, RE and I did not get along all that well. That's why he started this forum for me here.  ;D Howevah, he did like all the beady bubbles that would go to his forum because of my posts. So, he would always try to get me to come back and be nice to the right wing arseholes at the Doomstead Diner.

To give you an idea of our, uh, "discussions" about being away ;) (i.e. walkabout) check out the following topic thread:

Disagreements on the Doomstead Diner May 15, 2015 (http://renewablerevolution.createaforum.com/general-discussion/disagreements-on-the-doomstead-diner/msg3135/#msg3135)

At any rate, I had to learn how things are done here by trial and error. RE never gave me Admin status at the Doomstead Diner. (http://www.createaforum.com/gallery/renewablerevolution/3-200714183312.bmp) I still post over there periodically to pull on their chain :D, but I really cannot stomach most of them because of their rather thinly disguised greed is good world view.

Here's one the choice graphics I have used there to let them know what I think of their world view:
(http://renewablerevolution.createaforum.com/gallery/renewablerevolution/3-310817130655.jpeg)



Title: Re: Removed "forum" tab
Post by: GWarnock on November 09, 2017, 10:44:25 am
So now this is yours, free and clear?
Title: Boink. LMAO
Post by: GWarnock on November 09, 2017, 11:41:59 am
OK AG
I just posted an opinion on "corruption in Government"
The "Attach-1" I can (modify) and center it but can't resize?
Also, the 3rd attachment I can't see when I go to modify so I can't center or resize?
Title: Re: Posting content format and Fair Use copyright Law
Post by: GWarnock on November 09, 2017, 11:47:42 am
Do you have a thread where we can chat, I don't mind posting in public but it is a distraction asking questions off topic?
Title: Re: Removed "forum" tab
Post by: AGelbert on November 09, 2017, 01:25:40 pm
So now this is yours, free and clear?

I am the Admin. RE handed the Admin slot off to me. However, Create-a-Forum owns this and always will. I hate ads so I have my adblocker on all the time. Create-a-Forum doesn't like that but that's the way I roll. (http://www.pic4ever.com/images/cowboypistol.gif) If you do not have an adblocker on, you will be hit with stupid ads.

I am poor. Yeah, I'm smart and have lots of knowledge but I am not out to make a buck off of that. I am simply out to do what I think God wants me to do. The day Create-a-Forum decides they don't want this forum around, it disappears. I assume that they haven't shut it down because a sprinklling of people that do not have an adblocker on visit here. That's how Creat-A-Forum makes ends meet.

You can also set up a forum just like this free. This is the Creat-a-forum hangout if you wish to go that route at some time in the future.

Create a Forum Free Forum Hosting (https://createaforum.com/)
Title: Re: Posting content format and Fair Use copyright Law
Post by: AGelbert on November 09, 2017, 01:45:14 pm
Do you have a thread where we can chat, I don't mind posting in public but it is a distraction asking questions off topic?

Use the PM (Private Message) feature ("My Messages" button).

GWarnock, I want you answer the following questions to me right now in public.

1. Are you a lawyer?

2. Are you being paid by the fossil fuel industry or some other astro-turf front group (e.g. Heritage Institute, Americans for Prosperty, etc. and other Kochroach organizations, et al) to visit this forum and pretend to share my views?

(http://renewablerevolution.createaforum.com/gallery/renewablerevolution/3-191017143841.jpeg)GWarnock, I am experienced in being attacked by people disingenuously pretending to share my views. If you are in that category, I respect your position, but I want you to go away, NOW.

If not, make your intentions clear. I am tired of this polite sparring you are engaging in. (http://www.desismileys.com/smileys/desismileys_6961.gif)

If you, rather than "living to read my posts" (as you previously claimed before you began to question the legality of the posts you allegedly "live to read"), do not like the content of my posts, the door is in the same place it was when you got here. Have a nice day.  (http://www.pic4ever.com/images/www_MyEmoticons_com__burp.gif)


(http://biblepic.com/53/17761.jpg)
(https://allthoughtsworkoutdoors.files.wordpress.com/2011/08/p9047017-030close-up.jpg)
Title: Re: Posting content format and Fair Use copyright Law
Post by: GWarnock on November 09, 2017, 03:25:01 pm
All you ever had to do is click on my profile history in Cleantechnica or Raw Story to see my posting history for the last four years!
Please forgive me for being curious, I am NOT a lawyer or a **** troll, I am a foul mouthed pissed off agnostic that HATES the .01% that are Destroying this planet.
Good day sir!
Title: Re: Posting content format and Fair Use copyright Law
Post by: AGelbert on November 09, 2017, 09:42:15 pm
All you ever had to do is click on my profile history in Cleantechnica or Raw Story to see my posting history for the last four years!
Please forgive me for being curious, I am NOT a lawyer or a **** troll, I am a foul mouthed pissed off agnostic that HATES the .01% that are Destroying this planet.
Good day sir!


Apology accepted. I never checked your profile on Disqus so I didn't really know anything about you except that you seem to agree with me on many issues.

Now I know a little more. I agree 100% with your view of our corrupt government.

I like straight talk. If you are offended by my probing questions, tell me why. But if your skin is so thin that you will go off in a huff just because I got tired of all the questions and said so, then there is nothing I can do about that.

If you are agnostic, where is your basis for deciding what is right and what is wrong?  (http://www.desismileys.com/smileys/desismileys_1730.gif)

(https://c1cleantechnicacom-wpengine.netdna-ssl.com/files/2017/05/Jim-Comey.jpg)
Title: Re: Computer Software Security
Post by: AGelbert on December 22, 2018, 02:09:15 pm
Windows Update 😈 May Soon Reboot Your PC Immediately (If You Want, But Why❓)

CHRIS HOFFMAN  @chrisbhoffman

DECEMBER 21, 2018, 12:59PM EDT

What’s the most annoying thing about Windows Update? If you said the reboots, Microsoft has got you covered. Soon, Windows Update may be able to reboot your PC immediately after updates rather than waiting for a convenient time—wait, what?

It sounds ridiculous, but that’s one of the latest features reported by Albacore (@thebookisclosed) on Twitter. He’s found various other new Windows features before Microsoft has officially announced them, including the Windows Sandbox recently. We imagine Microsoft is at least testing this feature, even if it never makes it into the stable version of Windows.

Here’s the good news: This feature is optional. If you like, you can “stay up to date with a new setting that automatically restarts your device to install updates as soon as they’re ready.” Windows Update promises it will always notify you and give you the opportunity to postpone the reboot. But, if you’ve stepped away from your PC for a few minutes, you might return only to see that your PC has suddenly rebooted and you missed the countdown.

If you happen to be some sort of die-hard Windows Update fan, Microsoft has got you covered. New feature that restarts ASAP is in the works. pic.twitter.com/KUnwNGf3jq

— Albacore (@thebookisclosed) December 19, 2018

This feature just boggles our minds. Who asked for this? Windows can already reboot fairly quickly after updates, using features like Active Hours to restart when you’re not using your PC. Recent versions even use machine learning to detect whether you’re using your PC before restarting. Who asked for Windows Update’s reboots to be even more aggressive? Even Apple’s iPads don’t have an option to reboot this aggressively for automatic updates.

Windows 10’s next big update already includes a new system tray icon that can alert you when you need to restart, too. So there’s even less need for this feature!

If this “restart ASAP” feature ever does arrive, it will likely be part of the next version of Windows, codenamed 19H1 and scheduled for release around April 2019. It’s an optional feature, so it doesn’t really matter—but who would use this feature, and why?

https://www.howtogeek.com/fyi/windows-update-may-soon-reboot-your-pc-immediately-if-you-want-but-why/#comments (https://www.howtogeek.com/fyi/windows-update-may-soon-reboot-your-pc-immediately-if-you-want-but-why/#comments)

Agelbert NOTE: There were about 90 comments on this article. I am an old mainframe programmer that knows a thing or two about the binary bidness of computahs. The latest generation of computer owners are quite savy, but they have a tendency to forget the basics when they argue abour what is arbitrarily, and incorrectly, trashed by Microsoft, and how to prevent the loss of data.

I hope that I cleared the air somewhat (http://renewablerevolution.createaforum.com/gallery/renewablerevolution/3-221017161839.png) with this comment I just posted there (NOTE: "low" level in computer architecture mean "more important"  ;D. The lowest level is "Da software GODFADER 🦍"):

Agelbert: Maybe Microsoft 😈 does not want to admit how invasive their monitoring of eveything you do (i.e. scrutinizing EVERY newly open file) is, but it is child's play for their reboot software to look at every file that is "open" (i.e. new or being modified) and save that using an "autosave" feature (like Sketchup has if you are working and it crashes before you save a 3D file).

After reboot, the system would then tell you which files were "autosaved" (i.e. the ones you were working on and had not saved when the reboot hit) so you could elect to save them with a new file name or just save them as the modified file you were working on. 👍🌞

This is not hard. If Microsoft wants to make a claim that they do not see everything you do and are not scrutinizing it 24/7 with AI or whatever, that is irrelevant. 🤔

WHY? (http://renewablerevolution.createaforum.com/gallery/renewablerevolution/1/3-210818163123-16662165.gif)
Because reboot 🦍 software 👀 is at the lowest possible level of computer operation. It overrides EVERY 🧐 program, subprogram and software housekeeping routines in there.

THAT MEANS that ANY opened file is fair game at reboot time for being AUTOMATICALLY saved, WITH A NEW NAME to differentiate it as a newer version of the original file, by the reboot software, as long as there is some space in your nondestructive storage for it. IOW, Microsoft incorporating this feature in their reboot software would give them the excuse that they "only look at what you are doing when reboot time comes". 😇😉

We know better, but it's a good excuse! 😀

At any rate, Microsoft has NO EXCUSE for deep sixing ANY file you have opened, saved or whatever, when they do a reboot. (http://renewablerevolution.createaforum.com/gallery/renewablerevolution/3-130418202709.png)

Title: Re: Computer Software Security
Post by: AGelbert on May 09, 2019, 04:35:31 pm
(https://renewablerevolution.createaforum.com/gallery/renewablerevolution/2/3-090519162507.png)

(http://www.createaforum.com/gallery/renewablerevolution/3-100115191314.jpeg)
Title: Re: Computer Software Security
Post by: Anonymous on May 24, 2019, 11:37:21 am
Quote
Tengen

We're hypocrites if we cry about spying via backdoors. Every commercial OS here in the states has backdoors built in. Everyone with a smart phone is being spied on, even if the phone is turned off (only pulling the battery stops monitoring). We've done this for some time, piggybacking off big gov/MIC measures like the Patriot Act.

Yes, China engages in espionage. Yes, the Sesame Credit system is Orwellian. However, if you're a US citizen, it's not China you have to worry about, it's Uncle Scam.

https://moneymaven.io/mishtalk/economics/trump-s-trade-hypocrisy-huawei-is-and-isn-t-a-security-threat-9y2qVAwLs06YppU-Mu1SDQ/
Title: If you're not the customer, you are the product. 😟
Post by: AGelbert on January 13, 2020, 08:28:30 pm
Quote
If you're not the customer, you are the product.  (http://renewablerevolution.createaforum.com/gallery/renewablerevolution/1/3-120818180835-16271224.gif)

Can Innovators Overcome Inequality, or Make It Worse?
871 views•Jan 13, 2020


Thom Hartmann Program
203K subscribers


https://youtu.be/pCqd2r5BfoQ

What can innovators do to solve inequality?  Thom Hartmann reads from Ramesh Srinivasan's 'Beyond The Valley'.
 
🔴 Subscribe for more clips like this: https://www.youtube.com/user/thomhart...

Do you think the cure for inequality will be found... Beyond the Valley?

📕 BOOK: Beyond the Valley - http://www.amazon.com/dp/0262043130?t...

⭐ Join our Membership and Support the Channel:  https://www.youtube.com/user/thomhart...